How To: Manage Miner Repair

Updated

This guide covers how to use Foreman to manage taking miners down for repair, bringing them back online, and replacing down miners with a spare.

 

Removing a Miner for Repair

When a miner needs to come off its rack for repair, use Pull Miner. In one step it disables the miner, clears its Site Map location and records where it went, and it can open a ticket for the repair at the same time.

  1. Go to Site Map and find the miner. On the classic Site Map, click the miner's location. On Site Map Lite, open the miner's group, then the miner's Actions menu.
  2. Choose Pull Miner.
  3. Set the state to In Repair. If you use Assets & Inventory, you can also choose an Offline Location, such as a repair bench.
  4. Choose to open a new ticket for the repair (or link an existing one), then confirm.

To pull several miners at once, use Bulk Edit Miners on the Miners page. Full details: How To: Pull A Miner Out Of Service.

 

When you confirm with a ticket selected, the Add Ticket window opens with the miner already added. Enter a ticket name and set the owner, priority and status.

Screenshot 2025-05-15 at 11.56.45 AM.png

Click Save. The owner works the ticket and changes its status to Closed when the repair is done. There is no "Resolved" status; the statuses are Open, Pending, In Progress, Ready to Review, On Hold, RMA and Closed.

 

Returning Miners to Service

Now that your miners are in good shape, it's time to return them to service. Depending on whether you are returning one or many miners to service, you'll want to use either Manual Assignment or Interactive Fill Assignment. Both options are detailed below:

Manual Assignment

To assign a single miner to your Site Map, click on the empty cell you'd like to assign your miner and select Assign Miner. Then, enter the MAC address from your ticket and click Assign to finish the job

.

Assign Miner


Interactive Fill Assignment

If you have more than one miner returning to service simultaneously, the Interactive Miner Add feature allows you to add them all at once.

With Pickaxe running on a Windows laptop cabled directly into the same local network or switch as the miner you are trying to add, click the gear icon on the rack you want to fill and select Interactive Fill. Then, select the Pickaxe running on the laptop in the pop-up window.

Screenshot 2025-05-15 at 11.59.17 AM.png



Select the Current Profile of the miner you're adding, then press Listen. Once you see an "In Progress" in your Remote Commands window in the top right, press the IP report button on your miner. You'll see that your miner is now assigned to the empty grid location on your Site Map. Click Finalize to complete the fill assignment.

Remote Commands

When you click Finalize, a window will appear asking you which Pickaxe will hold the newly assigned miners. You'll want to select the main Pickaxe responsible for your Site here, not the temporary Pickaxe on the technician's laptop.

After the miner is back in its location, enable it and set its state back to Deployed, either from the miner or from its ticket (see How To: Change The Miner State In A Ticket), then close the ticket.

The Pull Miner and Interactive Fill functions allow you to maintain a complete site history. This is great for compliance - giving you visibility on where everything is and who worked on it last. You also get to keep the ticket history to track if certain miners are continuously having trouble.

 

Replacing a Miner with a Spare

To keep your facility operating at its peak efficiency, you can plug a spare miner into the spot vacated by the miner sent out for repair.

To do this, you'll click Replace rather than Pull Miner on the cell on your Site Map. Similar to the Interactive Fill Assignment from above, you'll need a laptop with a temporary Pickaxe installed that is cabled directly into the same local network or switch as the miner you are replacing.

In the window that pops up, select the Pickaxe on the technician's laptop and click Listen.


 

Replace Miner



Remove the old miner from the shelf and replace it with the new one. Once your new miner is plugged in, click the IP report button. Next, select the miner from the list and click 'Next.' Then, you'll have the option to use a Bluetooth scanner to scan in the serial number of the new miner.

At the confirmation window, you’ll have three options on what to do with the old miner:
1. Disable the miner
2. Disable the miner and open a ticket
3. Delete the miner

 

Have more questions? Submit a request below or reach out to the customer success team directly. We'd be happy to help!

 

Was this article helpful?

0 out of 1 found this helpful

Have more questions? Submit a request

Can't find what you're looking for?

Our support team can help with setup, hardware and billing questions.

Contact Support